Wet Gas Correction Factors

v1.1

Correction for Condensates

This page takes a resulting mass flowrate (from an ISO 5167 calculation for example) and applies the necessary correction factors to take account for condensates in the measured flow.

Configuration

Option	Setting
Correction Method	Murdock Chisholm De Leeuw Steven
Condensate Stream Density	Calculated Fixed

Inputs

Field Name	Units	Value
Mass Flowrate	kg/s kg/h kg/d t/s t/h t/d lb/h lb/s lb/d long ton/s long ton/h long ton/d short ton/s short ton/h short ton/d
Standard Density	kg/Sm³ g/Sm³ mg/Sm³ lb/Sft³
Condensate Standard Density	kg/Sm³ g/Sm³ mg/Sm³ lb/Sft³
Upstream Pressure (p1)	mbar mbar g bar bar g Pa Pa g kPa kPa g MPa MPa g GPa GPa g psi psi g inH2O @ 60°F
Recovery Point Temperature (t3)	°C °F K °R
API K0	-
API K1	-
API K2	-
Upstream Temperature (t1)	°C °F K °R
Standard Temperature	°C °F K °R
Condensate to Gas Ratio	-
Water to Gas Ratio	-
Methanol to Gas Ratio	-
Upstream Density	kg/m³ g/m³ mg/m³ lb/ft³
Murdock Constant	-
Expansion Factor	-
Gas : Discharge Coefficient	-
Liquid : Discharge Coefficient	-

Intermediates

Field Name	Value
Density Ratio	0
Correlation Factor A	0
Correlation Factor B	0
Correlation Factor C	0
Iterations	0

Results

Description	Units	Actual
CTLM	-
CPLM	-
Upstream Compressibility	/mbar /bar /Pa /kPa /MPa /psi
Coefficient of Thermal Expansion	mm/mm/°C mm/mm/°F mm/mm/K mm/mm/°R m/m/°C m/m/°F m/m/K m/m/°R
Condensate Stream Density	kg/m³ g/m³ mg/m³ lb/ft³
Water Standard Density	kg/Sm³ g/Sm³ mg/Sm³ lb/Sft³
Water Stream Density	kg/m³ g/m³ mg/m³ lb/ft³
Methanol Standard Density	kg/Sm³ g/Sm³ mg/Sm³ lb/Sft³
Methanol Stream Density	kg/m³ g/m³ mg/m³ lb/ft³
Condensate Mass Fraction	-
Water Mass Fraction	-
Methanol Mass Fraction	-
Liquid to Gas Ratio	-
Wet Gas Mass Fraction	-
Liquid Density	kg/m³ g/m³ mg/m³ lb/ft³
Lockhart-Martinelli Factor	-
Correction Factor	-
Corrected Mass Flowrate	kg/s kg/h kg/d t/s t/h t/d lb/h lb/s lb/d long ton/s long ton/h long ton/d short ton/s short ton/h short ton/d